Longitudinal braces which are connected to the cross bracing at the crossover points by rubber rings. All parts can be supplied as individual parts. Color Size transparent Large multi coloured Large transparent Medium multi coloured Medium transparent Small multi coloured Small

Because OneStep EEG-Gel ® contains neither fat nor alcohol or colourings it is easy to remove by rinsing and friendly to skin. Additional it has a neutral odour for greater acceptance by users and patients. In contrast to alcohol-containing or liquid EEG preparations, a good constant conductivity is achieved. Because it is a viscous gel, OneStep EEG-Gel ® can be selectively applied to any skin surface and still provide optimal results. This includes testing done at very low measurement resistance (ie from 2-5 kW) proven in numerous applications. Due to these excellent physical properties, OneStep EEG Gel ® is applicable for routine EEGs, long time EEGs, evoked potentials and nerve stimulations. Low measurement resistance Free of fat alcohol and colourings Selective application Long lasting conductivity Skin friendly Neutral odour

OneStep AbrasivPlus has been developed on the basis of practical experience. A consistent further development of our OneStep EEG gel, it has has a stronger grain size and a firmer consistency. For this reason it is particularly suitable for more horny skin or increased sweating and also for use in long-term monitoring. Stronger abrasive effect More viscous

You can order cotton pads for bridge, fungus and Z-electrodes without O-rings. However, to fit a pad to an electrode, the corresponding O-ring is required.

Attachment buttons for the chin strap for the Schröter- and Hygiene-Cap. Size Quantity 16 mm short thorn 2 pcs. 16 mm short thorn 10 pcs. 19 mm long thorn 2 pcs. 19 mm long thorn 10 pcs.

Disposable adhesive electrode with push button Ag/AgCl 55 mm diameter 30 pieces

waveguard connect: excellent choice for everyday EEG applications 21 active EEG electrodes, plus reference and ground Convenient connection to all EEG systems is achieved with optional adapters to individual 1.5mm touchproof connectors Coolmax breathable fabric for enhanced comfort and short drying times; easy to use and maintain Each head cap features 21 channels + reference & ground and includes a chin strap. Standard output is a DB25 connector. Electrode Type: Tin International 10-20 Electrode Placement The adapter to connect the EEG cap to the amplifier/headbox is available under part number XC-301. Color Size Yellow Baby (36-39cm) Red Infant (39-43cm) Blue Child (43-47cm) Yellow/black Small (47-51cm) Red/black Medium (51-56cm) Blue/black Large (56-61cm)

Electrodes braid for MultiCap Flat Multi Cap Size Electrodes Connector Cable lenght 24 – 36 cm 21 sintered Ag/AgCl 25-pol 150 cm 24 – 36 cm 21 sintered Ag/AgCl 25-pol 150 cm 36 – 51 cm 21 sintered Ag/AgCl 25-pol 150 cm 51 – 66 cm 20 sintered Ag/AgCl 25-pol 150 cm 51 – 66 cm 14 sintered Ag/AgCl 25-pol 150 cm

– Lead wires terminate in 1.5 mm touchproof connectors – Designed for use with disposable tab electrodes without lead wires – Compatibility: Most EMG systems Type Quantity Complete Set 1 set/pkg red / black pair 1 pair/pkg Ground 1/pkg

For all silicon caps Length Width 20 cm 2 cm 40 cm 2 cm by the metre 2 cm

Adhesive electrode with snap button Ag/AgCl Size 20 mm 24 mm

To facilitate mounting on the corresponding electrodes, we recommend our mounting cone Size Type Quantity 26 mm / 6.8 mm for electrode NKBE-0005 100 Pads / 50 O-Rings 26 mm / 6.8 mm for electrode NKBE-0005 100 Pads / 100 O-Rings 28 mm / 8.5 mm for bridge and fungus-electrodes 100 Pads / 50 O-Rings 28 mm / 8.5 mm for bridge and fungus-electrodes 100 Pads / 100 O-Rings 30 mm / 6.8 mm for bridge and fungus-electrodes 100 Pads / 50 O-Rings 30 mm / 6.8 mm for bridge and fungus-electrodes 100 Pads / 100 O-Rings 32 mm / 8.5 mm for bridge and fungus-electrodes 100 Pads / 50 O-Rings 32 mm / 8.5 mm for bridge and fungus-electrodes 100 Pads / 100 O-Rings