Top seller
Close filters
 
  •  
  •  
  •  
  •  
No results were found for the filter!
HH Stim probe 9013L0362 Hand-Held Stimulating Electrode
Replaceable felt pads Indicator locates cathode Diameter and distance Quantity Two 6mm diameter felt tip pads, 23mm apart 1/pkg
GDRGP0_V1-1 Ground Band Electrode with press stud
– With Clip Cable. – Inherent resistance 0 Ohm – Touch Proof Ø 1,5 mm DIN 42802 – Cable Length 150 cm Length Recording Area 10 cm 9 cm 18.5 cm 17.5 cm 45 cm 44 cm 75 cm 74 cm
HUSH_Bar_Electrode 9013S0352 HUSH Bar Electrode
Shielded cable for optimal results 10mm discs with 30mm spacing Cable withstands >50 lbs. pull test Length Instrument End 1 m 5-pin DIN
Disc electrode 019-411700 Reusable Disc Ground Electrode
Long-lasting stainless steel disc 1.5mm female touchproof Compatibility: Most EMG systems cable length diameter 0.75 m 30.5 mm
bar electrode 019-446700 Electrode Black Bar
10mm stainless steel discs, 30mm spacing Length Instrument End 1 m 1.5mm touchproof connectors
PLGD125 Plates Ground electrode
These electrodes made of stainless steel offer an alternative to the ground strips. The shape of the earthing electrodes does not essentially make a big difference. What is more important is the positioning, correct seating and a good transfer resistance. A Velcro strip or rubber band is used for fixing. To achieve the necessary transfer resistance if there are any contact problems, the electrode can be fitted using contact gel, as for traditional earthing electrodes. The connecting cable has a fixed connection with the plates and its length cannot be varied. – Electrode with 120 cm cable with 0.15 mm TP. Stecker – Diameter of electrodes is 32 mm
HUSH disc 9013S0402 HUSH Disc Electrode
10mm stainless steel discs Shielded cable for optimal results Cable withstands >50 lbs. pull test Length Instrument End 1 m 5-pin DIN
Digital ring 9013S0302 Digital Ring Electrodes
Shielded cable for optimal results Cable withstands >50 lbs. pull test Two adjustable rings Length Instrument End 1 m 5-pin DIN
SRCOL_V1-1 Ring electrode
Pair of ring electrodes for recording and stimulation. S pring electrode made of medical stainless steel and velco Loop thickness/Material Connectors Cable Length 2,4 mm - steel Ø 1,5 mm 100 cm shielded 2,4 mm - steel 5 pole din 100 cm shielded 2,4 mm - steel Ø 1,5 mm 150 cm shielded 2,4 mm - steel 5 pole din 150 cm shielded 1.45 mm - steel Ø 1,5 mm 100 cm shielded 1.45 mm - steel 5 pole din 100 cm shielded 1.45 mm - steel Ø 1,5 mm 150 cm shielded 1.45 mm - steel 5 pole din 150 cm shielded 10 mm - velcro Ø 1,5 mm 100 cm shielded 10 mm - velcro 5 pole din 100 cm shielded 10 mm - velcro Ø 1,5 mm 150 cm shielded 10 mm - velcro 5 pole din 150 cm shielded
ring electrode 019-439300 Disposable Ring Electrode with 0.5M Leads
Color-coded (red, black) attached lead wires terminate in 1.5mm touchproof connectors Two pre-gelled Ag/AgCl ring electrodes per package; contact area 8mm x 106mm Single patient use only Lead Length Quantity 20” (0.5m) 10 pkg/box
Disp Gnd Electrode 019-768500 Disposable Ground Plate Electrode
Pre-gelled Ag/AgCl ground plate electrodes; 40mm x 50mm contact area Two ground plate electrodes per pouch Ideal for NCS studies Requires reusable alligator-clip lead wires
SG25-000 Ground Band Electrodes
– High quality recording. – Elastic material which guarantees excellent patient comfort. – Pulled through with finest stainless steel threads. Inherent resistance Length / Width 50 OHM 25 cm / 20 cm 50 OHM 40 cm / 20 cm 50 OHM 70 cm / 20 cm 0 OHM 25 cm / 20 cm 0 OHM 25 cm / 20 cm 0 OHM 70 cm / 20 cm
Viewed

Help

Top