These electrodes made of stainless steel offer an alternative to the ground strips. The shape of the earthing electrodes does not essentially make a big difference. What is more important is the positioning, correct seating and a good transfer resistance. A Velcro strip or rubber band is used for fixing. To achieve the necessary transfer resistance if there are any contact problems, the electrode can be fitted using contact gel, as for traditional earthing electrodes. The connecting cable has a fixed connection with the plates and its length cannot be varied. – Electrode with 120 cm cable with 0.15 mm TP. Stecker – Diameter of electrodes is 32 mm

10mm stainless steel discs Shielded cable for optimal results Cable withstands >50 lbs. pull test Length Instrument End 1 m 5-pin DIN

– Lead wires terminate in 1.5 mm touchproof connectors – Designed for use with disposable tab electrodes without lead wires – Compatibility: Most EMG systems Type Quantity Complete Set 1 set/pkg red / black pair 1 pair/pkg Ground 1/pkg

– For use with pre-gelled tab electrodes – Cable withstands >50 lb pull test – Compatibility: Most EMG systems Type Lenght Electordeend Instrumentend Shielded 100 cm 3 color-coded clips (red, green, black) 5-pin DIN Unshielded 80 cm Clip Connector - green 1.5mm touchproof connector Unshielded 80 cm Clip Connector - red 1.5mm touchproof connector

• Designed for recording potentials from muscles and nerves • Insulated stainless steel needle with exposed trocar-shaped tip which serves as the recording area • Pre-sterilized • Requires a cable with a 0.7 mm female touchproof connector on the electrode end • 25/pkg Length Diameter Recording Area mm2 15 mm 0.35 mm (28G) 2.0 mm 2 Active 15 mm 0.70 mm (22G) 2.0 mm 2 Active 20 mm 0.35 mm (28G) 2.0 mm 2 Active 30 mm 0.35 mm (28G) 5.0 mm 2 Active 30 mm 0.70 mm (22G) 5.0 mm 2 Active 50 mm 0.70 mm (22G) 5.0 mm 2 Active

Optimal sharpness increases ease of insertion Ergonomic hub design for ease of control Use with reusable shielded cable for enhanced signal quality Pre-sterilized stainless steel needle: convenient; limits infection risk Needle Length Diameter Electrode End Quantity 10 mm 0.30 mm 0.7 mm male TP 40 pcs.

The subdermal needle with 0,7mm PIN connector can be attached to connecting cable 1002MED71F. The 2-core or 3-core (100cm or 200cm long) cable can be equipped with a 5-channel DIN or 1,5mm DIN plug as required.

Color-coded (red, green, black) attached lead wires terminate in 1.5mm touchproof connectors Two pre-gelled 20mm Ag/AgCl disc electrodes and one ground plate electrode per pouch Ideal for nerve conduction studies Type Lead Length NCV Test Kit 1 m

Shielded cable for optimal results Cable withstands >50 lbs. pull test Two adjustable rings Length Instrument End 1 m 5-pin DIN

Color-coded (red, green, black) attached lead wires terminate in 1.5mm touchproof connectors Three pre-gelled 20mm Ag/AgCl disc electrodes per set Ideal for AEP and nerve conduction studies Lead Length 0.5 m 1 m

Disposable Subdermal Needle – Subdermal Needle made of steel – Needle Length: 12 mm – Needle Ø: 0.35 mm – Cable Length: 8 cm Connector Pack 1 mm Pin 5 x 5 pcs 1 mm Pin 25 x 1 pcs 1 mm Pin 50 x 5 pcs 1 mm Pin 100 x 1 pcs 0,7 mm 5 x 5 pcs 0,7 mm 25 x 1 pcs

Color-coded (red, black) attached lead wires terminate in 1.5mm touchproof connectors Two pre-gelled Ag/AgCl ring electrodes per package; contact area 8mm x 106mm Single patient use only Lead Length Quantity 20” (0.5m) 10 pkg/box